€ 2,100.00
+ VAT & shipping*
Build time takes up to 3 months
A deposit of € 1,000.00 is required to start the production. Rest of the amount is due upon completion of the mixer.
We accept: Bank transfer (IBAN, SEPA) or Paypal
*Shipping fee: EU € 50.00, World € 120.00
Once you send the order form, we will get an email. Please allow us approximately 24 hours to handle the request and respond with a confirmation of your order.
What’s included
3-band Channel Equalizer
Class A Discrete Circuitry
External Power Supply Unit
Travel Case (Dust and Water protection)
3 Years International Warranty
International Shipping
Introducing resør 2525M
We are introducing the very first resør rotary DJ mixer with a 3-band Channel EQ. The Bass control with a range of +/-15 dB at 100 Hz is great for sculpting the low-end frequencies, providing ample flexibility for enhancing or attenuating bass elements in the mix. The Mids control with a range of +/-12 dB at 800 Hz allows for shaping midrange frequencies, essential for adjusting the warmth and presence of instruments and vocals. Lastly, the Treble control with a range of +/-12 dB at 10 kHz enables adjustments to the high-frequency content, helping to add sparkle or tame any harshness. A 3-band Baxandall EQ is engineered around our well-respected discrete Class-A Op-Amp.
We have encased the 2525M in a slim wooden chassis, which encompasses the faceplate, following the ethos of our four-channel models. Moreover, we have redesigned and improved the internal circuitry even further. Naturally, we're already rolling out these changes to all other models.
For a unique and personalized touch, among the extensive range of custom options, we offer Metallic Red, Metallic Blue, and Metallic Green faceplates; a Satin Dark wooden enclosure; as well as Urei, Matte Black, and Matte Silver Premium Aluminum Knobs.
resør 2525M with an optional Microphone Input
One of the most exciting modification is a Microphone input. For the best useability, it has a separate volume control in the central position of the faceplate. The Potentiometer controls the input signal level, which then sums together with channels One and Two.
The microphone input has plenty of gain and supports Dynamic Microphones only. We recommend using professional-quality, balanced microphones like Sure or Sennheiser.
The Input Jack is conveniently accessible on the rear panel, just above the Record Our RCAs. It is balanced. For the best results, we advise using a professional microphone cable.
Should you opt for this modification, simply select it in the order form.
Features
INPUTS
Channel ONE & TWO: selectable sources between LINE and PHONO (Stereo RCA)
OUTPUTS
Master 1: Balanced XLR
Master 2: Unbalanced RCA
Booth: Balanced TRS
Rec: Unbalanced RCA
CHANNEL EQ
3-band Baxandall: Bass +/- 15 dB (at 100 Hz), Mids: +/- 12dB (at 800 Hz), Treble: +/- 12dB (at 10 kHz)
MASTER ISOLATOR
3 Band, 24 dB /Oct, Linkwitz-Riley filters, crossover frequencies at 310 Hz and 3100 Hz Full-cut to maximum +12 dB, ON/OFF true bypass with Audio Grade Relay
MASTER INSERT
Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)
In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)
OTHER
2 x Analog VU Meters (1VRMS = 0db)
Cue/Mix Switch for the VU Meters, to display either the Cue or Mix signals
Rotary Switch to CUE between Channels ONE & TWO
Cue/Mix Blend potentiometer
External Power Supply Unit with lockable DC cable (both ends)
Travel Case (Dust and Water Proof)
3 Years International Warranty
CUSTOMIZATIONS
Wood: Natural Oak, Matte Black, Premium: Satin Dark
Faceplate: Black, Silver, Bronze; Premium: Metallic Red, Metallic Blue, Metallic Green
Knobs style: Resør Standard, Urei; Premium: Silver Matte Aluminum, Black Matte Aluminum
Microphone Input: a TRS jack on the rear panel, with a separate volume control
DIMENSIONS
250 mm (W), 250 mm (D), 98 mm (H) - (please note that this does not include Knobs, Headphone Jack on the front side, RCA's and Sockets on the rear side of the mixer)
WEIGHT
Mixer: 3.8 kg
Power Supply: 1 kg
With travel case: 9 kg
2525M in Natural Oak, Urei Knobs & custom Silver Matte Face
