€2.150,00

Excluded VAT. Shipping included in price.

Production time is around 6-8 months.

Free Worldwide Shipping

Product & Technical Specifications

What's New

100% Discrete Master Isolator

Newly redesigned Discrete Master Isolator with our own discrete Class A circuitry, which provides a cleaner, more transparent, and natural sound by keeping the signal path active through the entire cycle, reducing crossover distortion.

Audiophile Mundorf MCap Capacitors

Mundorf MCap capacitors utilise advanced, low-inductance, and vibration-damped construction with high-purity materials to deliver significantly higher resolution, faster transient response, and better spatial imaging compared to standard, mass-produced film capacitors.

'Mica ' Capacitors In Channel EQs

Mica capacitors are used over standard film capacitors to provide superior high-frequency performance, unmatched long-term stability, and minimal capacitance change over time and temperature. Absolute best sounding caps for tone circuits.

No customization has been created for this 3D model.

You can create a customization now by clicking here

(Don't worry! Your customers will not see this error message on your store resorelectronics.com.)

LOADING 3D CONFIGURATOR

3D Configurator

Customize

resør 2525 features the same discrete class-A circuitry as resør 2500, but it's equipped with a 100% discrete class A Master Isolator with a bypass toggle switch.

Features

INPUTS

Channel ONE & TWO: selectable sources between LINE and PHONO (Stereo RCA)

OUTPUTS

Master 1: Balanced XLR
Master 2: Unbalanced RCA
Booth: Balanced TRS
Rec: Unbalanced RCA

CHANNEL EQ

2525
2-band Baxandall: Bass +/- 18 dB (at 150 Hz), Treble: +/- 12dB (at 10 kHz)

MASTER ISOLATOR (100% DISCRETE CLASS A)

100% discrete class A circuitry, 3-band, 24 dB /Oct, Linkwitz-Riley filters, crossover frequencies at 310 Hz and 3100 Hz Full-cut to maximum +12 dB, ON/OFF true bypass with Audio Grade Relay

MASTER INSERT

Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)
In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)

OTHER

2 x Analog VU Meters (1VRMS = 0db)
Cue/Mix Switch for the VU Meters, to display either the Cue or Mix signals
Rotary Switch to CUE between Channels ONE & TWO
Cue/Mix Blend potentiometer
External Power Supply Unit with lockable DC cable (both ends)
3 Years International Warranty

Technical specifications

Line Inputs

Discrete, Class-A Op-Amps
Measured Line In to Master Out:
Frequency response +/- 0,3 dB, 20 Hz to 20 kHz
THD+N better than 0,004 %
SNR better than -95 dB

Phono Inputs

Discrete, Class-A Op-Amps, Gain 42 dB
Passive RIAA Equalization, polypropylene capacitors, close tolerance
Input impedance is 47 kohm
Input capacitance is 47 pF
Measured Phono In to Master Out:
RIAA accuracy within +/- 0,3 dB (20 Hz - 20 kHz)
THD+N better than 0,02 %
SNR better than -77 dB
Maximum input signal level before distortion 100 mVRMS

Master Output

Balanced XLR
Unbalanced RCA L and R
Impedance < 300 ohm

Booth Output

Balanced TRS
Impedance < 300 ohm

Record Output

Nominal level -10dBV
Impedance < 300 ohm

Crosstalk

Channel Fader offness < -100 dB
Channel L/R separation <-70 dB
Isolator offness < -90 dB

What's included in price

100% discrete class A circuitry
3 Years Warranty
External Power Supply Unit
24 dB (4-pole) 3 band discrete class A Master Isolator
Cue/Mix switch for the VU meter
Isolator True Bypass Switch

Dimensions and weight

DIMENSIONS
250 mm (W), 250 mm (D), 98 mm (H) - (please note that this does not include Knobs, Headphone Jack on the front side, RCA's and Sockets on the rear side of the mixer)

WEIGHT
Mixer: 4 kg
Power Supply: 1 kg