Technical Specifications
resør 2525 features the same discrete class-A circuitry as resør 2500, but it's equipped with a 100% discrete class A Master Isolator with a bypass toggle switch.
Features
INPUTS
Channel ONE & TWO: selectable sources between LINE and PHONO (Stereo RCA)
OUTPUTS
Master 1: Balanced XLR
Master 2: Unbalanced RCA
Booth: Balanced TRS
Rec: Unbalanced RCA
CHANNEL EQ
2525
2-band Baxandall: Bass +/- 18 dB (at 150 Hz), Treble: +/- 12dB (at 10 kHz)
MASTER ISOLATOR (100% DISCRETE CLASS A)
100% discrete class A circuitry, 3-band, 24 dB /Oct, Linkwitz-Riley filters, crossover frequencies at 310 Hz and 3100 Hz Full-cut to maximum +12 dB, ON/OFF true bypass with Audio Grade Relay
MASTER INSERT
Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)
In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)
OTHER
2 x Analog VU Meters (1VRMS = 0db)
Cue/Mix Switch for the VU Meters, to display either the Cue or Mix signals
Rotary Switch to CUE between Channels ONE & TWO
Cue/Mix Blend potentiometer
External Power Supply Unit with lockable DC cable (both ends)
3 Years International Warranty
Technical specifications
Line Inputs
Discrete, Class-A Op-Amps
Measured Line In to Master Out:
Frequency response +/- 0,3 dB, 20 Hz to 20 kHz
THD+N better than 0,004 %
SNR better than -95 dB
Phono Inputs
Discrete, Class-A Op-Amps, Gain 42 dB
Passive RIAA Equalization, polypropylene capacitors, close tolerance
Input impedance is 47 kohm
Input capacitance is 47 pF
Measured Phono In to Master Out:
RIAA accuracy within +/- 0,3 dB (20 Hz - 20 kHz)
THD+N better than 0,02 %
SNR better than -77 dB
Maximum input signal level before distortion 100 mVRMS
Master Output
Balanced XLR
Unbalanced RCA L and R
Impedance < 300 ohm
Booth Output
Balanced TRS
Impedance < 300 ohm
Record Output
Nominal level -10dBV
Impedance < 300 ohm
Crosstalk
Channel Fader offness < -100 dB
Channel L/R separation <-70 dB
Isolator offness < -90 dB
What's included in price
100% discrete class A circuitry
3 Years Warranty
External Power Supply Unit
24 dB (4-pole) 3 band discrete class A Master Isolator
Cue/Mix switch for the VU meter
Isolator True Bypass Switch
Dimensions and weight
DIMENSIONS
250 mm (W), 250 mm (D), 98 mm (H) - (please note that this does not include Knobs, Headphone Jack on the front side, RCA's and Sockets on the rear side of the mixer)
WEIGHT
Mixer: 4 kg
Power Supply: 1 kg
What's New
100% Discrete Master Isolator
Newly redesigned Discrete Master Isolator with our own discrete Class A circuitry, which provides a cleaner, more transparent, and natural sound by keeping the signal path active through the entire cycle, reducing crossover distortion.
Audiophile Mundorf MCap Capacitors
Mundorf MCap capacitors utilise advanced, low-inductance, and vibration-damped construction with high-purity materials to deliver significantly higher resolution, faster transient response, and better spatial imaging compared to standard, mass-produced film capacitors.
'Mica ' Capacitors In Channel EQs
Mica capacitors are used over standard film capacitors to provide superior high-frequency performance, unmatched long-term stability, and minimal capacitance change over time and temperature. Absolute best sounding caps for tone circuits.